T
Timothy ChavezAug 16, 2025
What to do if my Sharp AE-X3M18JR shows low voltage error?
- AAnthony SnyderAug 16, 2025
If your Sharp Air Conditioner indicates a low voltage error, ensure you connect it to a stable power supply.
To Next PageTo Next PageWhat to do if my Sharp AE-X3M18JR shows low voltage error?
If your Sharp Air Conditioner indicates a low voltage error, ensure you connect it to a stable power supply.
What to do if my Sharp AE-X3M18JR Air Conditioner has erroneous wiring?
If your Sharp Air Conditioner displays an erroneous wiring issue, you should inspect the wires connecting the units.
What to do if my Sharp AE-X3M18JR indoor unit fan shows an error?
If the indoor unit fan of your Sharp Air Conditioner is not working, replace the indoor fan motor.
What to do if my Sharp AE-X3M18JR Air Conditioner compressor doesn't start?
If your Sharp Air Conditioner's compressor fails to start, check the compressor cords (red, white, orange) for proper connection on both the PWB side and the compressor side.
What to do if my Sharp Air Conditioner has a drain pump unit error?
If your Sharp Air Conditioner is showing a drain pump unit error, you should replace the drain pump unit.
What to do if my Sharp AE-X3M18JR Air Conditioner has EEPROM data error?
If your Sharp Air Conditioner displays an EEPROM data error, replace the indoor unit control PCB.
What to do if my Sharp AE-X3M18JR detects inverter current error?
If your Sharp Air Conditioner detects an inverter current error, replace the outdoor unit control PCB assembly.
What to do if my Sharp Air Conditioner shows active filter overvoltage error?
If your Sharp Air Conditioner indicates an active filter overvoltage error, replace the outdoor unit control PCB assembly.
What to do if my Sharp AE-X3M18JR Air Conditioner shows serial open-circuit error?
If a serial open-circuit is detected in your Sharp Air Conditioner, check the wiring connections between the units.
What to do if my Sharp AE-X3M18JR Air Conditioner shows clock error?
If your Sharp Air Conditioner displays a clock error, replace the outdoor unit control PCB assembly.
General| Brand | Sharp |
|---|---|
| Model | AE-X3M18JR |
| Category | Air Conditioner |
| Language | English |
Provides detailed specifications for indoor and outdoor units, including electrical data and performance parameters.
Illustrates the physical size and layout of the outdoor unit with key measurements.
Lists cooling and heating capacities for various indoor/outdoor unit combinations.
Details essential electrical parts like compressors, fuses, and motors with their model numbers.
Presents schematic diagrams illustrating the electrical connections of the unit.
Visual representation of the unit's major functional blocks and their interconnections.
Explains various operational modes and control features of the air conditioner.
Details the active filter circuit for high efficiency and power factor improvement.
Explains the power supply and control circuits for the Intelligent Power Module (IPM).
Lists and describes various protection mechanisms for the unit's operation.
Provides methods for diagnosing and resolving operational errors using self-diagnosis.
Illustrates the refrigerant flow path for cooling and heating modes.
Details guidelines for refrigerant pipe installation and vacuum procedures.
Provides a step-by-step guide for disassembling the outdoor unit's components.
Lists all replaceable parts for the outdoor unit with reference numbers.
Lists components specific to the control board unit.
Lists components specific to the IPM30A board.
