Sharp AH-X15 Series - BEST SLEEP OPERATION; BEST SLEEP MODE; MAINTENANCE; Cleaning the Air Filters

EN-9
ENGLISH
Be sure to disconnect the power cord from
the wall outlet or turn off the circuit breaker
before performing any maintenance.
CLEANING THE FILTERS
1
Turn off the unit.
2
Remove the lters.
  Lifttheopenpanel.
  Pulltheairltersdowntoremovethem.
3
Clean the lters.
•Useavacuumcleanertoremovedust.Ifthe
lters are dirty, wash them with warm water
andamilddetergent.Dryltersintheshade
beforereinstalling.
4
Reinstall the lters and close the
open panel.
MAINTENANCE
MAINTENANCE AFTER AIR
CONDITIONER SEASON
1
Dry the inside of the indoor unit
thoroughly by taking the following
steps.
•
RuntheunitintheFANmodewithhigh
fanspeedfor3hours.
2
Stop the operation and unplug the
unit.
•Turnoffthecircuitbreaker,ifyouhaveone
exclusivelyfortheairconditioner.
3
Clean the lters, then reinstall them.
MAINTENANCE BEFORE AIR
CONDITIONER SEASON
1
Make sure that the air lters are not
dirty.
2
Make sure that nothing obstructs
the air inlet or outlet.
CLEANING THE UNIT AND THE
REMOTE CONTROL
•Wipethemwithasoftcloth.
•Donotdirectlysplashorpourwateronthem.It
cancauseelectricalshockorequipmentdamage.
•Donotusehotwater,thinner,abrasivepowders
orstrongsolvents.
For more comfortable sleep, temperature
and fan speed will be controlled automati-
cally by the best program.
1
During operation, press the BEST
SLEEP button.
•Theremotecontrolwilldisplay“”.
•Temperatureandfanspeedwillbecon-
trolledautomaticallyforthebestsleep.
TO CANCEL
PresstheBESTSLEEPbuttonagain.
BEST SLEEP OPERATION
1
NOTE:
•BESTSLEEPoperationisnotavailablein
DRYandFANmode.
CANCEL
B129_EN.indd 9 2021/11/10 14:27:26