Example
Initial setup (Continue)
Programme edit
Use this menu to set up a channel individually.
Erase: Channels can be erased individually.
Press / to select “Yes” or “No”, and then
press ENTER to erase the selected channel.
Label: You can change channel names
individually. Maximum 5 alphanumerics can be
input. Press ENTER to start labelling. Press
/ to select a character, press / to
select next character, and then press ENTER to
save.
Sort: Channel position can be sorted freely.
Skip: Channels can be skip by select “Off” or
“On”.
NOTE
"Label" is available only for ATV channel.
On-Screen Display Menu
EN 4-11
ENGLISH | FRANÇAIS | PORTUGUÊS | РУССКИЙ | 中文 | INDONESIA | ภาษาไทย | TIẾNG VIỆT | ﻲﺑرﻋ | АҒЫЛШЫН | O'ZBEK TILIDA
>><<
To Next Page
Loading...
