Example
System options
NOTE
For operating the on-screen display menu,
see page 4-3.
Power control
Power control setting allows you to save
energy.
No signal off
When this function is enabled, the TV
automatically shuts down if no signal is
received for more than 15 minutes.
NOTE
When it is 5 minutes before the power
shuts down, the remaining time will start to
keep appearing every minute.
When a TV programme finishes, this
function may not operate.
No operation off
When you enable this function, the TV
automatically shuts down if no operation is
performed for more than 3 hours.
(Disable, 3 hours, 30 min.)
NOTE
When it is 5 minutes before the power
shuts down, the remaining time will start to
keep appearing every minute.
Sleep timer
Allows you to set a time when the TV
automatically switches to standby.
The remaining time displays when the
sleep timer has been set.
Set the Sleep timer.
When set, the time automatically starts
counting down.
When it is 5 minutes before the time
expires, the remaining time will start to keep
appearing every minute.
NOTE
The TV will enter standby when the
remaining time reaches 0.
On-Screen Display Menu
EN 4-30
ENGLISH | FRANÇAIS | PORTUGUÊS | РУССКИЙ | 中文 | INDONESIA | ภาษาไทย | TIẾNG VIỆT | ﻲﺑرﻋ | АҒЫЛШЫН | O'ZBEK TILIDA
>><<
To Next Page
Loading...
Need help?
General