29
Protection against overturning
There is a danger of the product overturning in the case of a disaster or sudden collision. Carry out the following tip-
resistant measurement for your safety.
CO
M
PONEN
T
/AV INPUT
Cup hook
(commercially available)
Tie (commercially
available)
Wall
Clamps
(supplied)
Screw
(commercially
available)
Table
Restraining band
(supplied)
Table
Thick soft cloth
(ex. Blanket)
Screw for band
(supplied)
Stand
Restraining band
(supplied)
View from the top
Screws for attaching clamps (supplied)
Anchoring the TV to the wall or a pillar
1 Fix the product with the 2 clamps (supplied), using
the screws (supplied).
2 Fix the TV to the wall using extra strong ties
(commercially available).
Fixing the TV to the table
1 Lay the TV down on cushioning (such as a blanket)
over a table.
2 Attach the band (supplied) to the bottom of the
stand using the screw (supplied).
3 Transfer the product to the table where you intend
to fix the TV.
4 Fix the TV to the table by the band with a screw
(commercially available).
• Use a screw (commercially available) whose shape is
compatible with the band.
CAUTION
• As this product is heavy, use a table that is wide
enough to support the product and capable of
withstanding the product’s weight. The table should be
set where it will not be overturned.
LC32LE355X_EN.indb 29LC32LE355X_EN.indb 29 6/24/2013 10:43:19 AM6/24/2013 10:43:19 AM
To Next Page
Loading...
