BASIC OPERATION
(Continued)
Control
section
of
main
unit
MAIN POWER
[/~~
?·~tJ
V
1 Press MAIN POWER, located on
the upper side of the main unit, to
on.
2 The POWER indicator instantane-
ously changes from red to green
and the main unit is turned on.
INOTE >
• The input mode indication disappears after
several seconds.
... On-screen
display
[DSTEREO
<ON
AIR
SAP
MONO
2
POWER indicator
COMPONENT mode
AV2 mode
AV1
mode
I
COMPONENT
I
~
I
• The AV input mode indication remains
for 3 seconds.
• AV1: Video equipment connected to the
AV1
input terminals.
An S-Video input terminal is
additionally provided for the
AV1
input. If both the S-Video terminal
and normal video terminals are
connected with cables, the S-
Video input terminal takes priority.
• AV2: AV2 mode is used to adjust the
preset settings and
IN
or OUT
can be selected. AV2 indication is
not displayed when OUT is
selected. (For details on setting
Tr--V_m_o_d_e
_
AV2-IN/OUT, see page 26.)
12
1
• COMPONENT:
Video equipment connected to the
COMPONENT input terminals.
1 Turn
on
the power of the con-
nected video equipment.
2 Press
TVNIDEO
and select the
applicable input source. The
screen displays AV1, AV2, COM-
PONENT or TV mode each time
TVNIDEO
is pressed.
SHARP
GJCDCD
CD
CD
CD
CD CD CD
@)(D@
To Next Page