Sharp AQUOS LC-15E1U

ADJUSTMENT (Continued)
[3] ACTIVATE ON TO TURN ON V-CHIP BLOCK
1 Press MENU to display the MENU
screen.
SHARP
Channel
Select
2 Press .. IT to move the cursor to
V-CHIP BLOCK, and press
~/~
to enter.
3 INPUT SECRET NO. will be
displayed. Input the 4-digit secret
number by using Channel Select.
(The secret number is not
displayed
on the screen.)
MENU
[Q'IIISLEEP TIMER
~V IDEO ADJUST
gPRESET
fIICLOSED CAPT IONI>
lWV-CH IP BLOCK I>
laSET UP
MENU
lIISLEEP TIMER
~V IDEO ADJUST
gPRESET
fIICLOSED CAPT IONI>
[Q'lWV-CH IP BLOCK I>
laSET UP
I NPUT SECRET NO.
o 1 2 3
ENTER:.
4 Press MENU to register the secret
number.
EXIT:.
TV-Y
I NPUT SECRET NO.
V-CHIP HAS BEEN ACTIVATED
INOTE >
• V-CHIP HAS BEEN ACTIVATED will
not be displayed if STATUS is not
configured to ON.
2 Press MENU to display INPUT
SECRET NO.
3 Input the 4-digit secret number by
using
Channel Select; V-CHIP
BLOCK is temporarily canceled. If
you input
an incorrect secret
number, SECRET NO.
IS
INCORRECT is displayed. In this
case, input the correct secret
number.
Channel
Select
[4] CANCELING THE V-CHIP BLOCK SCREEN WHILE V-CHIP BLOCK IS ACTIVATED
1 V-CHIP HAS BEEN ACTIVATED
will be displayed if you watch the
program with Program Rating data
as same as you configured.
INOTE >
• If you turn the power on from off, V-CHIP BLOCK will be activated again.
If you select V-CHIP BLOCK again by using MENU, V-CHIP BLOCK will be turned on again.
I