Software Update (USB)
This option allows you to have the TV software version
always updated.
1 Add the binary file to USB memory root.
2 Insert the memory in the TV USB socket.
3 Press MENU on the remote control unit and
select OPTION.
4 Press ▼ until Software Update (USB) option
appears.
• Press OK. Are you sure? message is displayed.
• Select Yes with ◄/► and press OK. The software
update will start.
•The updated percentage appears. The TV will
restart automatically when the process arrives at
100%.
5 Return to OPTION menu to check that the version
has been updated successfully.
Basic adjustment
This function allows you to use a password to lock
certain programs and adjustments.
The password is always needed to access to this
menu ( by default, the password is 1234.)
● Set password
Allows you to change the password. Press OK, enter
the new password and confirm.
● Block program
The password is needed before locking one
program.
1 Select the program or programs you want to lock
and press GREEN button. A padlock appears next
to the locked channel in the channel list.
2 Press End to exit.
This option enters your selection in a locked channels
list.
NOTE
• To prevent the channel search, when one program is locked,
the channel menu is locked too.
• To view a locked channel, you must enter the password.
When you select a locked channel a password prompt
message pops up.
• You must repeat the previous steps to unlock one locked
program.
● Parental Guidance
This function allows you to restrict DTV programs
depending on the age classification.
The information about classification is provided by the
broadcasting station.
Options
Options menu
Lock settings
Lock programs
Lock