How to fix a Sharp TV with no power?
First, verify that you have pressed the POWER button on the remote control. If the indicator light on the TV is red, then press POWER. Next, ensure the AC cord is properly connected. Finally, check if the power has been turned on.
Why is my Sharp TV remote control not working?
There might be several reasons why your Sharp TV remote isn't working: * Check if the batteries are inserted with the correct polarity. * The batteries may be worn out, so try replacing them with new ones. * Strong or fluorescent lighting may interfere with the remote's operation. * A fluorescent light might be interfering with the remote control sensor.
Why does my Sharp Aquos LC-32PX5X power turn off suddenly?
Your Sharp TV might be turning off suddenly because the unit's internal temperature has increased. Try removing any objects blocking the vents or clean the vents. Also, check the power control setting and ensure the sleep timer is not set.
What causes strange colors on my Sharp Aquos LC-32PX5X screen?
Strange colors on your Sharp TV screen can be caused by several factors. Try adjusting the picture tone. If the room is too bright, the picture may appear dark. Also, check the color system and input signal settings.
General| Screen Size | 32 inches |
|---|---|
| Display Type | LCD |
| Backlight Type | CCFL |
| HDMI Ports | 2 |
| USB Ports | 1 |
| Weight | 8.5 kg |
| Aspect Ratio | 16:9 |
| Contrast Ratio | 1000:1 |
| Brightness | 450 cd/m² |
| Response Time | 8 ms |
| Input Ports | HDMI, USB, Composite, Component, VGA |
| Standby Power Consumption | 0.5 W |
| Resolution | 1366 x 768 |
| Audio Output | 2 x 10W |
| Refresh Rate | 50/60 Hz |
| Viewing Angle | 176° (H) / 176° (V) |
To Next Page