Controlling HDMI Equipment Using
LINK Operation (Continue)
One Touch Playback
LINK Operation allows you to operate the
HDMI-connected equipment with one
remote control.
Press to start playing back a title.
The last played program is played back.
You can use the following buttons during
broadcast viewing.
Buttons Description
POWER
(SOURCE)
Turns the power of the HDMI
connected devices on and off.
Hold down this button to go in
reverse.
Starts playback.
Hold down this button to fast
forward.
Stops playback.
Sets pauses and still pictures.
Pressing quickly once takes you to
the start of the chapter currently
playing. Each time you press it,
you move back to the start of the
previous chapter.
Pressing quickly once takes you to
the start of the next chapter. Each
time you press it, you move ahead
to the start of the next chapter.
NOTE
The buttons / do not function
with the following Blu-ray disc players
currently available.
- BD-HP20U, BD-HP50U
Using LINK Operation
ENG76
ENGLISH | FRANÇAIS | ESPAÑOL
>><<
To Next Page
Loading...
