Sharp Aquos LC-80UE30U

Changing Channels
You can change channels in several ways.
Method 1
Using CH / on the remote control unit
or on the TV.
Method 2
Using remote control buttons 0-9, • (DOT).
Examples:
To select a 1 or 2-digit channel number (e.
g., Channel 5):
Press 5 ENT
To select a 3-digit channel number (e. g.,
Channel 115):
Press 1 1 5 ENT
To select a 4-digit channel number (e. g.,
Channel 22.1):
Press 2 2 • (DOT) 1 ENT
NOTE
When selecting a 1-digit channel
number, it is not necessary to press 0
before the number.
When you enter 0-9 only, channel
selection will be made if there is no
operation within a few seconds.
If you push "0" by itself, nothing will
happen.
Complete the above steps within a few
seconds.
When you enter 0-9 and • (DOT), channel
selection will be made if there is no
operation within a few seconds.
Direct Button Operation
ENG51
ENGLISH | FRANÇAIS | ESPAÑOL
>><<