Sharp AQUOS LE580X Series

VideoIn
AudioSelect
Thisfunctionsetstheterminaltooutputthe
computeraudio.
Theadjustmentitemsvarydependingonthe
inputsource.Selecttheinputsource
correspondingtotheterminalconnectedtothe
PCandthenadjustthedesireditem.
Toperformtheoperation,referto"Devices">
"Videoin">"HDMI3">"AudioSelect".
HDMI3
HDMI(Digital):SelectthiswhentheTVand
PCareconnectedusinganHDMI-certified
cableandaudioisinputviathesame
cable.
HDMI+Analog:SelectthiswhentheTVand
PCareconnectedusingaHDMI-certified
cableandtheaudioisinputvia
INPUT5(L/R).
NOTE
When"AudioSelect"issetto
"HDMI+Analog",soundwillnotbeproduced
ifyouuseonlyanHDMI-certifiedcableto
connectHDMI-compatibleequipment.To
producesound,youshouldmakeananalog
audioconnection.
IfyouwanttoconnectHDMI-compatible
equipmentusingonlyanHDMI-certified
cable,set"AudioSelect"to"HDMI(Digital)".
"AudioSelect"canonlybesetforthe
HDMIIN3.
DevicesOperation
EN4-1
ENGLISH | FRANÇAIS | PORTUGUÊS | РУССКИЙ | 中文 | INDONESIA | ภาษาไทย | TIẾNGVIỆT | ﻲﺑرﻋ | АҒЫЛШЫН | O'ZBEKTILIDA
>><<