CH Search (Channel search)
Channel auto search makes the TV look for all channels
viewable in the set area.
8 When "Air" is selected in Antenna setting:
Press _ to select "Start", and then press ENTER.
_he Channel search results may include scrambled
channels or channels that are not viewable in the set
area. Press _ to select "Yes", and then press ENTER
to remove scrambled channels.
When "Cable" is selected in Antenna setting:
_Press _ to select "Analog & Digital Search Start" to
search both analog and digital broadcasts, or to select
"Analog Search Start" to search only analog broadcasts,
and then press ENTER.
Smart TV
When you connect to the Intemet on the TV, select the
desired connection method and follow the instructions shown
on the display.
• Wireless LAN connection is possible only when the WPS
(push button) method is used. If any other method is
used, make settings by Smart TV > Internet Setup >
Intemet Connection. (See Daaes 9-2 to 9-43
9 Press ,I!_, to select "Yes", and then press ENTER.
10 Press _ to select "Wired" or "Wireless", and then
press ENTER,
• The Channel search will start automatically.
• To exit the Channel search screen, select "Cancel", and
then press ENTER.
ENG 2-5
To Next Page
Loading...
