• Failed to receive
broadcast.
• No broadcast now.
• An incompatible audio
signal has been
received. Check the
output device settings.
E202 • Check the antenna cable. Check that the antenna
is correctly setup.
E203 • Check the broadcast time in the program guide.
-- • This message is displayed when an audio format
other than PCM, DTS or Dolby Digital is input.
- Set the audio output format of connected
external HDMI equipment to PCM, DTS or Dolby
Digital.
- Refer to the operation manual of the external
equipment for setting details.
ENG 11-9
To Next Page
Loading...
