Make sure the following accessories are provided with
the 3D glasses.
3D glasses x 2 Cleaning cloth x 1
• The illustrations above are for explanation purposes and
may vary slightly from the actual accessories.
1 Power button
2 LED indicator
• The power turns off automatically in the following cases:
o When pairing fails
o When the 3D glasses are not operated in standby for
15 seconds
1 Power button:
• When the power button is pressed for 2 or more seconds
with the power off, pairing with the TV starts.
• When the power button is pressed for 2 or more seconds
with the power on, the power turns off.
• When paired, the power will turn off if the power button is
pressed for 2 or more seconds.
• When the power button is pressed for less than 2
seconds with the power off, the 3D glasses will turn to
standby.
• When the 3D glasses are in 3D mode with the power on,
pressing the power button for less than 2 seconds will
turn the 3D glasses to 2D mode.
• When the 3D glasses are in 2D mode with the power on,
pressing the power button for less than two seconds will
turn the 3D glasses to 3D mode.
• When paired, the 3D glasses will be non-reactive if the
power button is pressed for less than 2 seconds.
2 LED light
• When paired with the TV, the LED light blinks in red and
green.
• When pairing is completed successfully, the LED blinks in
green for 3 seconds.
• When the power is turned on, the LED lights up in green
for 3 seconds.
• When in 3D mode, the LED blinks in green in 3-second
intervals.
• When in 2D mode, the LED blinks in red in 3-second
intervals.
• When the power is turned off, the LED blinks in green 3
times.
• When in low voltage mode:
o When in 3D mode, the LED blinks in green in 3-
second intervals.
o When in 2D mode, the LED blinks in red in 3-second
intervals.
ENG 5-2
To Next Page
Loading...
