Before using the 3D glasses for the first time, remove the
insulating sheet attached to them.
To view 3D images, it is necessary to pair the 3D glasses
and TV.
• To confirm pairing of the 3D glasses and TV, make sure
that 3D images are displayed on the TV screen.
• When the power button is pressed for 2 or more seconds
with the power off, pairing with the TV starts. When
pairing is completed successfully, the LED blinks in
green for 3 seconds.
• To switch between 2D and 3D modes, briefly press the
power button.
• When paired, make sure that the 3D glasses are kept at
a distance of 1.64-6.56 ft (50 cm-2 m) from the TV. If too
close, pairing cannot be performed.
ENG 5-3
To Next Page
Loading...
