• The TV screen may temporarily become black when the
TV is trying to detect a 3D image signal and when
switching from 3D to 2D mode.
2 Turn on the 3D Glasses and place them on your head.
3 You can now view 3D images.
4 Press 2D/3D during the 3D mode.
Select "Yes" and press ENTER to switch to 2D mode.
• Take off the 3D Glasses and turn off the power.
The image signal may contain a 3D identification signal. You
can enable the TV to automatically detect the 3D image type
by selecting "Setup" > "3D Setup" > "3D Auto Change" on
the TV.
(See Daae 5-11._
1 When "3D Auto Change" is set to "Mode 1" or "Mode
2"
• The 3D image type is detected automatically and the
appropriate 3D image is displayed.
5 Take off the 3D Glasses and turn off the power.
• If the input signal switches to 2D, 2D images are
displayed automatically.
• 3D mode is canceled automatically when the setting is
changed, input selection is changed, or the power is
turned off.
When "3D Auto Change" is set to "Off"
• The following message is displayed. Press 2D/3D.
• Press _t# to select the "Yes", and then press ENTER.
ENG 5-8
To Next Page
Loading...
