• To play back data on a USB memory device, insert the
USB memory device on the TV. USB mode is selected
automatically. (Go to step 2)
• Use the following procedure to switch back to USB mode
after switching from USB mode to another mode.
1 Select "USB" or "Home Network" from INPUT list screen.
2 Press D.
3 Press MY (or _) to select the drive/server where you
want to find your files, and then press ENTER.
• For USB mode, select the drive.
• When in Home Network mode, select the server.
4 Press _ to select "Photo", "Music" or "Video", and
then press ENTER.
Example
5 Press _ to select the desired folder, and then press
ENTER.
• The Media screen can be displayed even by using the
application window. To display the application window,
press SmartCentral.
(See Daae 3-6.t
• You cannot switch the input mode if a USB memory
device is not connected.
• You do not need to select the drive/server in step 3 when
there is only one drive in the connected USB memory
device or there is only one Home Network server
connected to the TV.
• 16 is the maximum number of USB drives and 10 is the
maximum number of Home Network servers that can be
displayed.
• If the TV is turned off and then on again, the number
assigned to the USB drive may change.
• "VIEW MODE" is fixed during the Photo or Music mode.
During "Video mode", you can select "Auto" or "Original".
• The key guide display disappears automatically after a
particular time has elapsed. To display the key guide
display again, press DISPLAY.
USB device USB Memory, USB card reader (Mass
Storage class), USB hard drive
File system FAT/FAT32/NTFS (USB hard drive only)
Photo file JPEG (.jpg) (DCF2.0 compliant)
format Multi-Picture Format (.mpo) (CIPA DC-
007 Compliant)
MP Type : Multi view individually image
(stereoscopic view)
Music file MP3 (.mp3)
format Bitrate: 32k, 40k, 48k, 56k, 64k, 80k, 96k,
112k, 128k, 160k, 192k, 224k, 256k,
320kbps
Sampling frequency: 32k, 44.1k, 48kHz
ENG 6-2
To Next Page
Loading...
