Sharp AQUOS wish4 - Turning the Power on; Using the Product

- 5 -
Turning the Power On
A
f (hold down for at least 3 seconds) while the
product is turned off.
◎ When you turn the power on for the first time or perform factory
reset after purchasing the product, the initial setting screen is
displayed automatically. For details on the initial setting, refer to “取
扱説明書 詳細版 (Full Instruction Manual)” (Japanese).
Using the Product
Before using the product, be sure to read the “Safety Precautions” in
this manual for proper use.
If you think the product may be malfunctioning, first check with the “かん
たん診断 (Quick check)” under “使 い方 サ ポート (Usage support)” app
(Japanese).
(https://www.au.com/mobile/service/tsukaikata-support/usage/)
(Japanese)
■ Quick check
Operate on the home screen → “App list screen” → [au Service] → [使
い方 サ ポート] (Usage support) → [診断] (Check)→ [かんたん診断]
(Quick check).
* This is available to the customers who contract to au/UQ mobile.
Also refer to “故障とお考えになる前に (Troubleshooting)” in “取扱説明書
詳細版 (Full Instruction Manual)” (Japanese).
(https://www.au.com/online-manual/aquos_wish4/) (Japanese)
(https://www.au.com/support/service/mobile/guide/manual/)
(Japanese)
•
Communication is not possible even inside the service area in places
where the signal does not reach (e.g. tunnels and basements). Also,
communication may not be possible in poor reception areas.
Communication may be interrupted if you move into a poor reception
areas during communications.
•
Since this product uses radio waves, the possibility of communication
intercepts by third parties cannot be eliminated. (Though the 5G/LTE/
WiMAX 2+/UMTS/GSM system has high security and confidential
communication features.)