11
Getting Started
AQUOS zero
About Charging
The following charging options are available.
Charging
Option
Description
ROBOQUL
(desktop
holder)
Place handset in ROBOQUL and
charge using an AC Adaptor (optional
accessories).
AC Adaptor
Connect handset and AC Adaptor (optional
accessory) directly.
Indications while Charging
Charging/Notification Lamp
Charging/Notification Lamp illuminates red while charging;
illuminates green when charge is almost full.
・If Charging/Notification Lamp is blinking, charging is not
working properly. Make sure that you are using Charger
and products specified by SoftBank Corp. If you are using
specified products only, contact a SoftBank Shop or
Customer Service.
Lock Screen while Charging
Charging progress appears in lock screen.
・"Charging": normal charging
・"Charging rapidly": rapid charging
・"Charging slowly": low-speed charging; handset begins
low-speed charging depending on the conditions, such as
when nearly charged.
Charging Cautions
Water Resistance
ROBOQUL and AC Adaptor (optional accessories) are not
waterproof. Never connect a charger plug/USB Type-C™
plug while handset or Charger is wet.
Handset is water resistant; however, if a charger plug/USB
Type-C plug is inserted while it is wet, liquid (tap water,
beverage, sea water, pet urine, etc.) or a foreign object
adhered to handset or a charger plug/USB Type-C plug may
cause overheating, burnout, fire, malfunction, burns, etc.
due to electric shock, short-circuiting, etc.
Handling Cords
Do not pull, bend, or twist cord; may damage the cord.
About Charging Abroad
SoftBank Corp. is not liable for problems resulting from
charging handset abroad.
ROBOQUL
ROBOQUL is designed for use in Japan. You assume all
responsibility if used abroad. Use abroad may infringe on
the country's/region's laws; check before using.
To Next Page
Loading...
Need help?
General
