210
Drying Handset
After exposing handset to water, be sure to dry Earpiece,
Volume Keys, Power Key, Mic/Recorder Mic, External
Connection Jack, Speaker, Card Tray, and Mic.
Wipe handset surface with dry cloth
Holding handset firmly by its sides, shake it about 20 times
・When shaking handset, hold it firmly so as not to drop it.
・Shake with circled ○ portion downward to drain water from
all holes and gaps.
Pat against dry cloth to remove moisture from openings and
grooves
・Water may be trapped in openings; pat against a dry cloth
to remove it.
Leave handset on dry cloth for approximately 2 - 3 hours at
room temperature
Handset is dried.
Cautions
When Removing Moisture
Do not put a cotton swab, cloth, etc. into openings; may
affect water and dust resistance.
After Drying Procedure
Do not use handset in wet conditions.
・Calls may fail, or moisture may transfer to clothes, bag,
etc.
・Moisture may short-circuit External Connection Jack or
other parts.
・Exposure to cold may freeze moisture and cause
malfunction.
To Next Page
Loading...
