Do you have a question about the Sharp AU-A129E and is the answer not in the manual?
Details the pin, terminal, input/output, and function for the microcomputer.
Outlines steps for diagnosing control circuit and thermistor issues.
Checks control circuit by shorting terminals 1 and 2 of connector CN4.
Checks output of each operation by using AUX. and TEST RUN buttons.
Flowchart for diagnosing issues when the machine doesn't respond to the remote controller.
Steps to diagnose issues when the room is not cooled and the compressor doesn't operate.
Details the pin, terminal, input/output, and function for the microcomputer.
Outlines steps for diagnosing control circuit and thermistor issues.
Checks control circuit by shorting terminals 1 and 2 of connector CN4.
Checks output of each operation by using AUX. and TEST RUN buttons.
Flowchart for diagnosing issues when the machine doesn't respond to the remote controller.
Steps to diagnose issues when the room is not cooled and the compressor doesn't operate.
| Refrigerant | R410A |
|---|---|
| Power Supply | 220-240V, 50Hz |
| Cooling Capacity | 12000 BTU |
| Air Flow Rate | 550 m³/h |
| Air Flow (High) | 550 m³/h |
Loading...