Sharp Auvi MD-DR77 - Page 122

122
1-BIT PORTABLE MINIDISC RECORDER MD-DR77
ENGLISH OPERATION MANUAL
MD-DR77(J)
TINSJA019AWZZ
7. Enter characters in the same procedure as steps 6 – 7 in “Cre-
ating a disc name” on page 121.
8. After entering all characters, hold down the MENU button for
2 seconds or more. The group name is stored.
Creating a track name
1. In the stop mode or pause mode, select a track by pressing the
or button.
2.
Press the MENU button.
3. Select "NAME" by pressing the
or button and
press the MENU button.
4.
When "TRACK NAME" appears, press the MENU button.
You can enter characters now.
5. Enter characters in the same procedure as steps 6 – 7 in “Cre-
ating a disc name” on page 121.
6.
After entering all characters, hold down the MENU button for
2 seconds or more. The track name is stored.
To add a character:
1. Set the unit to the character entry mode.
2.
Press the – or + to select the character before which you
wish to add another character.
3. Select the character you wish to add.
4.
Hold down the MENU button for 2 seconds or more.
To erase a character:
1. Set the unit to the character entry mode.
2.
Press the - or + to select the character you want to erase.
3. Press the GROUP button.
4. Hold down the MENU button for 2 seconds or more.
To change a character:
Erase the character you want to change, and then add a new
one.
Erasing one track at a time (TRACK ERASE) (page 76)
1. In the stop mode, select the track to erase by pressing the
or button.
2.
Press the MENU button.
3. Select "EDIT" by pressing the
or button and
press the MENU button.
4. Select "Tr.ERASE" by pressing the
or button and
press the MENU button.
5. Press the MENU button. The track is erased.
Erasing all tracks at once (ALL ERASE) (page 77)
1. In the stop mode, press the MENU button.
2. Select "EDIT" by pressing the
or button and press
the MENU button.
3. Select "ALL ERASE" by pressing the
or button and
press the MENU button.
4. Press the MENU button. All tracks are erased.
Combining tracks (COMBINE) (pages 78 - 79)
1. In the stop mode, select the latter of the two tracks to be com-
bined by pressing the
or button.
2.
Press the MENU button.
3. Select "EDIT" by pressing the
or button and press
the MENU button.
4. Select "COMBINE" by pressing the
or button and
press the MENU button.
5.
Press the MENU button. The tracks are combined.