Sharp AY-X10CR User Manual

AH/AY-X08CR
AH/AY-X10CR
AH/AY-X13CR
OPTION
HOW TO REPLACE THE AIR PURIFYING FILTER (AZ-F900B; Electrostatic Type (2-sheet package))
Precautions
® The filters are sealed in a plastic bag to keep thier dust collection effect. Do not open the bag until using the
fitters. (Otherwise the filters’ life may get shorter.)
® Do not expose the filters to direct sunlight.
(Otherwise they may deteriorate.)
1. REMOVE THE AIR FILTERS.
1) Open the front panel
2) Push the air filter up slightly to unhook them.
2. CHECK THE AIR PURIFYING FILTERS.
1) Take of the old air purifying filters from the air filters. Snap out in the arrow marked direction.
3. REINSTALL THE AIR FILTERS
1) Reinstall the air fitters in the original positions.
2) Close the front panel.
3) Push the center part of the panel firmly to lock it in place.
REPLACEMENT INTERVALS GUIDELINE
Replace the air purifying filters at the intervals of 3-6 months.
The dirty filters are not washable for reuse.
The filters are available at your nearest dealer.
A

Sharp AY-X10CR Specifications

General

Brand	Sharp
Model	AY-X10CR
Category	Air Conditioner
Language	English