2 – 9
AY-XPC15PU
 
 
 
 
 
 
TIMER OFF 
1
 Press the TIMER OFF button.
 The TIMER OFF indicator will blink. 
2
 Press the TIME ADVANCE or RE-
VERSE button to set the desired 
time.
 The time can be set in 10-minute incre-
ments.
3
 Press the SET/C button.
 The orange TIMER lamp ( ) will light 
up.
3
2
1
NOTE:
 When the TIMER OFF is set, the temperature 
setting is automatically adjusted to prevent 
the room from be   coming excessively cold 
or warm, for example while you sleep. (Auto 
Sleep function) 
  HEAT mode: One hour after the timer is set, 
the temperature setting drops by 5 °F (3 °C).
  COOL mode: One hour after the timer is set, 
the temperature setting rises by 2 °F (1 °C).
TIMER OPERATION
TO CANCEL 
Press the SET/C button.
 The orange TIMER lamp ( ) will turn off.
 
The current time will be displayed on the re-
mote control.
TIMER ON 
1
 Press the TIMER ON button.
  The TIMER ON indicator will blink. 
2
 Press the TIME ADVANCE or RE-
VERSE button to set the desired 
time.
 The time can be set in 10-minute incre-
ments.
3
 Press the SET/C button.
 The orange TIMER lamp ( ) will light 
up.
4
 Select the mode, temperature, and 
fan speed as desired.
  Press below buttons to select mode;.
: HEAT  : COOL
: AUTO  : DRY
 Press the TEMPERATURE button ( or 
) to set the desired temperature.
 Press the FAN button to set the desired 
fan speed.
CANCEL
TO CHANGE TIME SETTING
Cancel the TIMER setting, then set it 
again
TO COMBINE TIMER ON AND 
TIMER OFF
Timer on and timer off can be set up at 
the same time
Set the TIMER OFF and TIMER ON. The 
settings will be automatically com-
bined.
Example
(
Current time: 9:00 p.m.)
OFF TIMER at 11:00 p.m.
ON TIMER at 7:00 a.m.
 The arrow (   or   ) between the TIMER ON 
indicator and the TIMER OFF indicator shows 
which timer will activate 
NOTE:
 You cannot program the ON-TIMER and OFF-
TIMER to operate the unit at different tem-
peratures or other settings.
 Either timer can be programmed to activate 
prior to the other.
NOTE:
 The unit will turn on prior to the set time to 
allow the room to reach the desired tempera-
ture. (Awaking function)
1
3
2
 AUTO  SOFT  LOW  HIGH