To Next PageTo Next PageHow to fix Sharp AY-XPC12PU Air Conditioner when indoor and outdoor units do not operate due to outdoor unit thermistor open-circuit?
If your Sharp Air Conditioner's indoor and outdoor units aren't operating, the issue might stem from an outdoor unit thermistor open-circuit. Start by checking the connector of the outdoor unit thermistor to ensure it's securely installed. Then, measure the resistance of the outdoor thermistors.
How to troubleshoot Sharp Air Conditioner when indoor and outdoor units do not operate because of outdoor unit thermistor short-circuit?
If the indoor and outdoor units of your Sharp Air Conditioner are not operating, it could be due to an outdoor unit thermistor short-circuit. To resolve this: 1. Measure the resistance of the outdoor unit thermistors. 2. Check the lead wire of the outdoor unit thermistor for a torn sheath and short circuit. 3. Replace the outdoor unit thermistor assembly.
What to do if Sharp Air Conditioner indoor and outdoor units do not operate due to EEPROM (outdoor) data error?
If the indoor and outdoor units of your Sharp Air Conditioner are not operating, and the cause is 'EEPROM (outdoor) data error', replace the outdoor unit control PWB assembly.
What to do if Sharp AY-XPC12PU Air Conditioner indoor and outdoor units do not operate due to IPM high temperature error?
If the indoor and outdoor units of your Sharp Air Conditioner are not operating, and the cause is 'IPM high temperature error', replace the outdoor unit control PCB assembly.
General| Cooling Capacity | 3.5 kW |
|---|---|
| Power Supply | 220-240V, 50Hz |
| Refrigerant | R32 |
| Operating Temperature (Cooling) | 18°C to 43°C |
| Operating Temperature (Heating) | 24 °C |
| Features | Auto Restart, Sleep Mode, Self-Cleaning |
Essential safety warnings and precautions for proper and safe operation of the air conditioner.
Important cautionary advice to prevent unit damage or personal injury during use.
How to select operating modes (Heat, Cool, Auto, Dry) and begin operation.
Procedures for setting the desired room temperature using the remote control.
How to choose the appropriate fan speed for optimal air circulation.
How to activate and deactivate the Plasmacluster ion feature for air purification.
How to enable the Silent mode for reduced noise during operation.
How to activate the Full Power mode for rapid cooling or heating performance.
How to activate the Self Clean function to dry the unit and prevent mold growth.
Addresses problems like unit not operating, not heating/cooling, or remote signal loss.
