EN-10
By using this function, the louver will be
automatically adjusted to deliver comfort-
able air gently and quickly across the ceil-
ing or fl oor without cold/warm air blows
directly on you as much as possible.
In heat mode, vertical airfl ow louver is set
downward to deliver the warm air down to
the fl oor. In cool or dry mode, vertical air-
fl ow louver is set obliquely upward to de-
liver cool air to the ceiling in order to avoid
direct airfl ow.
1
During operation, press the COAN-
DA AIFLOW button.
(HEAT mode)
• The remote control will display “ ”.
(COOL / DRY mode)
• The remote control will display “
”.
TO CANCEL
Press the COANDA AIFLOW button
again.
NOTE:
• If you want COANDA AIRFLOW operation in
FULL POWER mode, press COANDA AIR-
FLOW button during FULL POWER operation.
•
The COANDA AIRFLOW setting and the MULTI
SPACE setting can not be used together.
1
COANDA (GENTLE COOL / HEAT)
AIRFLOW
1
NOTE:
• The unit will operate at “Extra HIGH” fan
speed for 15 minutes for long distance deliv-
ery of conditioned air, and then shift to “HIGH”
fan speed after 15 minutes.
• SILENT, COANDA, and FAN SPEED button
will be disabled during this operation.
•
Effectiveness of this function may differ depend-
ing on the room layout, installation position of the
unit, and insulation level of the space concerned.
The unit will operate to cool or warm
multiple rooms in well insulated house by
pressing this button.
1
During cooling or heating operation,
press MULTI SPACE button.
The remote controller will display “ ”.
and fan speed icon will be changed to “ ”.
Louver angle will be changed to the position
for long distance delivery of cool or warm
air.
(HEAT mode)
• The remote control will display “
”.
(COOL / DRY mode)
• The remote control will display “
”.
TO CANCEL
Press MULTI SPACE button again.
MULTI SPACE
OM_AY-XPC5PU(A760)_EN-FR-ES.indb EN-10OM_AY-XPC5PU(A760)_EN-FR-ES.indb EN-10 10/19/12 5:42:32 PM10/19/12 5:42:32 PM
To Next Page
Loading...
Need help?
General
