Select “Next”, then press ENTER.
For testing after confirming the settings, select
“Test”, then press ENTER.
If the test has failed, an error message appears.
Retry to perform the settings after checking that the
connection (page 21) is performed properly.
Confirm your setting.
Access Point:
Security key:
XXXXXXXXXXXX
XXXXXXXXXXXX
Test
Follow steps 6–11 of “When using a LAN Cable”
on page 43 to complete the network connection
settings.
12
13
•
14
SETTINGS
Information on MAC addresses
A MAC address is a unique ID number for network
equipment. A MAC address is necessary for MAC
address filtering on the wireless router/access
point.
Before the wireless communication setup is
performed, we recommend writing down the MAC
address and keeping it in a safe place. (The MAC
address is displayed on the “Current Ethernet
setup info.” screen when wireless communication
is set (See step 5 of page 44).)
MAC address
45
Settings
To Next Page
Loading...
