BEFORE USING THE MACHINE
9
TO CHANGE THE ANGLE OF THE OPERATION PANEL
You can change the angle of the operation panel.
Adjust the angle for ease of viewing.
MOTION SENSOR
This sensor detects the presence of a person that approaches the machine, and automatically wakes the machine from
sleep mode (Motion Sensor Mode Only).
Three settings are available for the detection range ( / / ).
• The motion sensor detects the movement of sources of heat.
• The detection range may vary depending on the installation site and environment (ambient temperature, etc.).
Motion sensor
Near
Far
60 degrees
Detection range
Approx.
maximum
1.5 m
To Next Page
Loading...
