32
Image Projection (Continued)
Geometric Adjustment
Upper Left Upper Right Lower Right
Lower Left
GEOMETRIC ADJUSTMENT
1
Press KEYSTONE on the
projector or on the remote
control repeatedly until
“GEOMETRIC ADJUSTMENT” is
displayed.
2
Press P, R, O or Q to move the
position for the upper left of the
image.
3
Press ENTER to set the position.
4
Repeat the same procedure with
the positions for the upper right,
lower right and lower left of the
image.
At this time, pressing RETURN on the
projector or on the remote control returns
to the previous screen.
When the position of the lower left is
set, the correction is made and the
display disappears.
•
•
ROn-screen display
H&V KEYSTONE
ADJUST
NEXT RESET
GEOMETRIC ADJUSTMENT
ROn-screen display
H&V KEYSTONE
ADJUST
NEXT RESET
GEOMETRIC ADJUSTMENT
To Next Page
Loading...
