4
POWER SWITCH; PRINT / ITEM
COUNT MODE SELECTOR:
“OFF”: Power OFF.
“•”: Power ON. Set to the non-
print mode.
(“•
•
•
...
•
•
•
–P” will be
printed.)
“P”: Power ON. Set to the print
mode.
(“•
•
•
...
•
•
•
+P” will be
printed.)
“P•IC”: Power ON. Set to the print
and item count mode.
The counter will count the
number of times that
has
been pressed in addition.
Notes: • Each time
is used in
subtraction, 1 will be
subtracted from the count.
• The count is printed when
the calculated result is
obtained.
• Pressing of
, or
clears the counter.
OPERATING CONTROLS
• The counter has a
maximum capacity of 3
digits (up to ±999).
If the count exceeds the
maximum, the counter will
recount from zero.
DECIMAL SELECTOR:
Presets the number of decimal
places in the answer.
In the “F” position, the answer is
displayed in the floating decimal
system.
Downloaded from: http://www.usersmanualguide.com/
To Next Page
Loading...
Need help?
General
