4-2
CV10CTX
4.Remove rear board assy
rear board assy
5.Remove front panel sub-assy
panel sub-assy
6.Remove display board sub-assy
display board sub-assy
7.Remove the electric box sub-assy
electric box cover
electric box sub-assy
cable
Steps
Procedure
Remove the six screws fixing rear board, to
remove the rear board assy.
Remove the screws fixing the left, right and back
side of the front panel, to remove the panel
sub-assy.
Remove the fixing screws fixing display board
sub-assy, to remove the display board sub-assy.
Remove the two screws fixing electric box cover,
to remove the electric box cover. Pull off the
connection cable on electric box, remove the
screws fixing electric box, to remove the electric
box sub-assy.
To Next Page
Loading...
Need help?
General
