CVP09LX
2 – 6
28.Unscrew 2 screws holding the control box.
Remove the control box from the unit.
29.Unscrew 6 screws holding the casing cover.
Remove the casing cover from the unit.
30.Unscrew 4 screws holding the orifice.
Remove the orifice from the unit.
Then turn the band to the direction, as shown in below figure.
CAUTION: RETURN THE BAND TO THE ORIGINAL DIRECTION
WHEN RE-ASSEMBLYING.
31.Move the band to the direction shown in below figure (approx.11/
16").
Then removed the drain hose B.
32.Unscrew the screw holding the lead wire.
33.Turn the band, as shown in below figure.
CAUTION: RETURN THE BAND TO THE ORIGINAL DIRECTION
WHEN RE-ASSEBLYING.
Move the band to the direction of the arrow(approx.11/16"), and
removed the drain hose A.
To Next Page
Loading...
