EN
DO NOT use any other AC adapter or lead with your Aroma
Diuser as this may cause overheating and potentially
hazardous conditions. DO NOT use USB power extension cables
as these may cause the voltage to drop and result in the Aroma
Diuser working incorrectly.
(Refer to the
4 Connecting to the AC Adapter on page 2).
When connecting to the AC adapter ensure that the socket and
plug t securely together before plugging the AC Adaptor into
the mains supply. Loose tting plugs will cause either erratic or
no operation.
Ensure that the water level is lled to the maximum level before
use; the maximum level is marked clearly inside the cup and
must not be exceeded.
Auto restart function
Your SHARP Aroma Diuser has a unique feature whereby it
will turn on automatically whenever the supply is connected.
This handy feature allows you to use the unit with a smart plug
enabling remote control operation.
(Refer to the
5 Connecting your Aroma Diuser via a Smart
Plug on page 2).
The Auto Restart function will not work if the water level is too
low. Ensure that before using this advanced feature that the
water is at the maximum level and that, if necessary, there is oil
in the device.
When using the Auto Restart function, ensure that the lid is
tted correctly and securely before doing so. If the lid is not
tted correctly, water may spill out of the unit.
Essential oils
This Aroma Diuser is compatible with the majority of essential
oils available from many suppliers. It is recommended that
only a 3-5 drops of oil are used with each maximum level ll of
water. Follow the usage advice supplied with the essential oil
for best results.
Before using essential oils, check the warning labels for allergy
advice.
Cleaning
After every use, clean the Aroma Diuser cup and lid with a
soft cloth.
(Refer to the
6 Cleaning your Aroma Diuser on page 2).
DO NOT use strong alkaline or acidic cleaners.
DO NOT use abrasive cleaners or abrasive cleaning cloths.