FLOW CHART NO.18
2Only REC mode inoperative
YES
NO
NO
YES
YES
YES
NO
YES
NO
NO
YES YES
YES
NO
NO
YES
NO
NO
YES
YES
NO
Are REC and/or PB mode inoperative?
Check peripheral circuit of X701.
1Only PB mode inoperative
Does PB CTL signal appear at
pin(76) of IC701 (TP204)?
Does AA-MH harness normally?
Does A/C head operate normally?
Replace A/C head.
Check AC-MC connector and
capstan FG signal line.
Check capstan motor unit and/or
replace.
Is there capstan AFC and APC
at pins(31) and (33) of IC701?
Replace IC701.
Replace AA-MH harness.
Readjust the A/C head height.
Is there 14.3MHz oscillation at
pins(37) and (38) of IC701?
Does the capstan FG signal appear
at pin(67) of IC701?
Dose pin(29) of IC701 operate
normally?
Check 1.
Check 2.
Replace IC701.
Is there REC CTL signal output at
pins(74) and (75) of IC701?
Is the V-SYNC signal (reference)
at pin(50) of IC701?
Check peripheral circuit of
C715~716 and R708.
Is there capstan AFC and APC
at pins(31) and (33) of IC701?
Capstan servo does not function.
To Next Page
Loading...
