Sharp DV-RW260H User Manual

1
Quick Start Guide for DV-RW260H
Accessories
Connection
When you connect your equipment as shown in the diagram above, switch the TV to it's AV channel (this may
be labelled EXT / AUX etc.)
Disconnect all antenna wires from the rear of your TV and connect as follows.
TV
AC power cord 240V/50 Hz
RF-Input (from house antenna)
RF-Output (to TV)
Antenna
Supplied Coaxial cable
Supplied Scart cable
EXTERNAL Scart Socket (AV2)
VCR/DVD
TV Scart socket (AV1)
To Scart socket
Antenna-Input
How to install the batteries
Replace the
compartment
cover.
Install two
batteries (sup-
plied), paying
attention to the
polarity diagram in
the battery
compartment.
Open the battery
compartment
cover in the
direction of the
arrow.
Use micro batteries type R-03 (“AAA” size, UM/SUM-4, HP-16 or similar).
Remote control unit
Two R-03 (“AAA” size,
UM/SUM-4, HP-16 or
similar) batteries for
the remote control unit
21 pin scart cable
75 ohm coaxial cable
Quick start guide
TV/VIDEO
2H00707A QS 5/14/05, 9:17 AM1

Sharp DV-RW260H Specifications

General

Brand	Sharp
Model	DV-RW260H
Category	DVD VCR Combo
Language	English

Summary

Accessories

Remote Control and Batteries

Includes remote control unit, AAA batteries, and quick start guide.

Cables Included

Details the 21-pin scart cable and 75 ohm coaxial cable provided.

How to Install Batteries

Battery Installation Steps

Guide on opening, inserting batteries with polarity, and closing the compartment.

Connecting Your Device

Connection Diagram

Illustrates connecting the unit to a TV via Scart and coaxial cables.

Automatic TV Tuning and Clock Setting

Automatic Setup Procedure

Steps for automatic TV tuning and clock setting upon initial plug-in.

Tuning Notes

Information on automatic clock correction and station tuning list.

Navigating the Setup Menu

Setup Menu Navigation Guide

Explains how to access and navigate the setup menu for various settings.

Disc Recording Modes and Finalisation

Recording Modes: VR vs. Video

Details VR mode for editing and Video mode for compatibility on discs.

Recording TV Programs

Instructions for recording TV programs and setting end times.

Finalising a Disc

Steps to finalize a disc for playback on other DVD players.

Selecting Automatic Disc Format

Guide to choosing VR or Video mode for automatic disc formatting.

Disc Formatting Operations

Automatic Formatting of New Discs

Process for formatting unused DVD-RW discs before use.

Formatting a Recorded Disc

Steps to erase and reformat a previously recorded disc.

Dubbing Operations

Dubbing Tape to Disc

Instructions for copying content from video tape to a DVD.

Dubbing Disc to Tape

Instructions for copying content from DVD to a video tape.