MAINTENANCE
Unplug the vacuum cleaner from an electrical outlet before
maintenance.
CLEANING THE UNIT
When cleaning the unit, use a
dampened cloth with lukewarm water.
Never clean or spray with a liquid
such as insecticide, benzene, thinner
or oil.
CLEANING HEPA FOR
AIR-INLET
Note:
The filter should be cleaned at times
or when it becomes visibly soiled.
Always operate the vacuum cleaner
with filter installed.
Otherwise, suction power may be
decreased or the motor may be
damaged.
Remove the HEPA from the
dust cup
Rinse the HEPA in lukewarm
water and dry completely.
Do not use a washing machine to
rinse the filter.
Do not use a hair dryer to dry it.
Rinsed sponge in lukewarm
water and dry the sponge
thoroughly.
Put the sponge and HEPA filter
back.
CLEANING THE
OUTLET FILTER
Open the air-outlet cover and
pull the filter out.
Wash and dry the HEPA
thoroughly.
Put the filter back.
To Next Page
Loading...
