To Next PageTo Next Page
Need help?Do you have a question about the Sharp Eco Inverter AH-XP18MV and is the answer not in the manual?
General| Cooling Capacity | 5.0 kW |
|---|---|
| Inverter Technology | Yes |
| Refrigerant | R32 |
| Power Supply | 220-240V, 50Hz |
| Indoor Unit Weight | 11 kg |
| Type | Split System |
Critical safety precautions to prevent injury, damage, or hazards during operation and installation.
Advisories for safe use, including ventilation, electrical safety, and appliance handling.
Labelled diagram identifying all parts of the indoor air conditioning unit.
Labelled diagram identifying all parts of the outdoor air conditioning unit.
Details the functions of each button on the remote control transmitter.
Explanation of symbols, indicators, and readouts on the remote control display.
Step-by-step guide for inserting batteries and resetting the remote control.
Instructions for operating the unit when the remote control is unavailable.
Practical advice on how to use the air conditioner efficiently to save energy.
Guidance on aiming the remote, signal reception, and operational precautions.
How to choose between AUTO, COOL, and DRY modes using the MODE button.
Instructions on turning the air conditioner on and off using the ON/OFF button.
How to adjust the temperature setting using the THERMOSTAT button.
How to select the fan speed (AUTO, SOFT, LOW, HIGH) using the FAN button.
How to adjust the vertical airflow direction using the SWING button.
How to adjust the horizontal airflow direction by manually moving the louvers.
Activates maximum power for rapid cooling with specific display and lamp indicators.
How to deactivate the SUPER JET mode and return to normal operation.
Sets vertical louvre upward for indirect airflow to avoid direct draft.
How to deactivate the GENTLE COOL AIR mode.
Activates Plasmacluster ions to reduce airborne mold and improve air quality.
How to turn off the PLASMACLUSTER operation.
Reduces mold and dries the unit's interior using Plasmacluster ions.
How to stop the SELF CLEAN operation prematurely.
Sets the unit to automatically turn off after one hour.
How to cancel the ONE-HOUR OFF TIMER.
Sets the unit to turn off automatically, adjusting temperature for sleep.
Sets the unit to turn on before a specified time for desired temperature.
Explains how the indicator displays the unit's current power usage.
Limits the unit's maximum power consumption to save energy.
Provides important notes on how the INSTANT LOW WATTAGE function operates and displays.
Step-by-step guide on how to remove, clean, and reinstall air filters.
Instructions for cleaning the indoor unit and the remote control.
Steps for preparing the unit after the air conditioning season ends.
Checks to perform before starting the unit for a new operating season.
Lists normal operational sounds and conditions that are not equipment malfunctions.
Provides common checks for unit not operating, cooling, or receiving signals.
Specifies recommended indoor/outdoor temperature ranges for cooling mode.
