Sharp EL-1611P User Manual

8
AC POWER OPERATION (OPTION)
AC adaptor: Model EA-28A
When the AC adaptor is connected to the calculator, the power
source is automatically switched over from dry batteries to AC
power source.
HOW TO CONNECT THE AC ADAPTOR
Make sure that you turn the calculator’s power off when
connecting or disconnecting the AC adaptor.
To connect the AC adaptor, follow steps
➀
and
➁
.
To disconnect the AC adaptor, simply reverse the procedure.
➀
➁
AC adaptor
connecting
terminal
Notes: • When the calculator is not in use, be sure to remove
the adaptor from the calculator and the wall outlet.
• Never use any other AC adaptor except EA-28A.
CAUTION
Use of other than the AC adaptor EA-28A may apply
improper voltage to your SHARP calculator and will cause
damage.
Downloaded from: http://www.usersmanualguide.com/

Sharp EL-1611P Specifications

General

Type	Printing
Form factor	Desktop
Digits	12 digits
Battery type	AA
Number of batteries supported	4
Roll width	58 mm

Weight and Dimensions

Weight	315 g
Dimensions (WxDxH)	96 x 40 x 191 mm