Sharp EL-6790

3. Registering a City Name not Found in the List
If you want to set the city for the World clock to Rome, for
example (Rome belongs to the zone number 12, but is not
included in the city list):
1. Press @ once or twice to display the World clock.
2. Press to enter the edit mode.
3. Press RE?» (or S) to set the zone number to 12.
(Initially the city is Paris.)
4. Enter the city name (up to 8
characters).
ROME (Press to
delete unnecessary
character(s), if necessary.)
5. Press to store the new name.
* То register a city name for the Home clock, first display the
Home clock then followed by A (4 to move
the cursor to the city name line.
* Only one changed city name can be stored in each of the
Home and World clocks.
* Each changed name is stored until you change the zone
number next time.
ROME. 12
TUE NOV 9 '99
CAPS
4: 05А
4. Setting Daylight Saving Time/Summer Time
If DST (daylight saving time/summer time) is used, the local
time is advanced one hour during the summer. Both the Home
clock and World clock can be set for DST as follows:
(1) Home clock
1. Press Q once or twice to display the Home clock.
2. Press to enter the edit mode.
3. Enter the correct daylight saving time/summer time.
4. Press to set the time as DST.
А " #” appears on the display and DST is now set.
(2) World clock
1
ċipex
. Press (à) once or twice to display the World clock.
2. Press (2nd) (EDIT), then (2nd) (ENTER).
А " Ж” appears on the display and DST is now set. Setting
DST in the World clock automatically sets the time one hour
ahead.
* When DST is set for one World city, it is used for all cities
displayed in the World clock.