Sharp EL-6790

Schedule Mode
Schedule mode is selected by pressing @ once or twice.
Each time you press this key, the display switches between
Schedule mode and Calendar mode.
Schedule mode is used for storing schedule information (year,
month, day, hour, minute, and schedule detail) in memory. In
this mode, a schedule listing consists of 3 entries: date, time,
and detail. The maximum number of characters for each detail
is 512. In the date entry, 4 digits can be entered for the year
and 2 digits each for the month, day, hour, and minute.
1. Storing Schedule Listings
There are 3 ways to entering the desired date:
(1) Entering the desired date in Calendar mode
(2) Entering the desired date with RE» (or 4)
(3) Entering the desired date directly
After the date has been entered, actual entry of time
and detail is the same for all 3 ways.
(1) Entering the desired date in Calendar mode
<Example> Enter the following data.
“Lunch with Tom” from 11:30 AM to 1:00 PM on
November 24, 1999.
. Press “@) to change to
. Press *@) in Calendar mode to display the
calendar for the current date (November 8, 1999).
. Press (9, &, (S, or © to move the cursor to November
24, 1999.
WED NOV 24 '99
TIME ?
the Schedule mode. Time
entry prompt for November — |c^es
24, 1999 is displayed. >
Multiple listings can be scheduled on the same date.
‚ Enter the starting and ending time.
1130 01
(For the 24-hour clock, press 1130 © 13 Q.)
"DESCRIPTION 7' is displayed. E
“100” will be entered automatically.
You can enter schedule details without the ending time.
Press (or (9) after entering the starting time to
display "DESCRIPTION ?" prompt.
You can also enter schedule details without specified time,
except details starting with a number. Skip entering time and
start to enter letters for the details as described in step 5.
The hour and minute should each consist of 2 digits.