Sharp EL-6790

2. Press RED.
The number of listings stored
in TEL/MAIL1, TEL/E-MAL2
and URL files is displayed.
* Even after you have designated an each file name for TEL/
MAIL1, TEL/MAIL2, or URL, "T/M1", "T/M2", or “URL”
does not change according to the names you stored.
3. Press fe» again to display the number of listings stored
in Memo, Schedule and Anniversary files.
4. Press to return to the display on which you were
before pressing MENU).
e When the amount of memory used is reaching almost F
(FULL), delete unnecessary data and free up memory to
make enough space to store new listings.
* Since the same memory is used for Telephone, Schedule,
Anniversary, and Memo modes, the number of listings that
can be stored in each of these modes will vary depending
on the situation of the other modes.
4. Adjusting the LCD Contrast
See page 3 for operation.
30
5. Deleting the Data
(1) Deleting all of the data in each mode
If all of the entire data for Telephone/E-mail, URL, Schedule,
Anniversary, or Memo mode is unnecessary, you can delete all
of the data in each mode individually.
«Example» Delete all listings in the TEL/MAILT file.
1. Press Re ©.
2. Press CD to select TEL/MAILI.
"DELETE ? V/N' is displayed.
* After performing the step 1, press the followings keys in
other modes:
TEL/MAIL2: 2)
URL: ©
Schedule: D> CD CD
Anniversary: > DD
Memo: Kx» ©
• When the Secret function is on, “SECRET ON MODE” is
displayed and the file cannot be deleted. !n this case, turn the
Secret function off (page 22) and repeat the above procedure.
• Even after you have designated the file name, the message
does not change accordingly.