Sharp EL-6790

* The first display is determined by your previous choice. The
5 most recently used symbols/special characters are stored
and displayed on this display.
Press to exit the symbol entry mode.
You can also enter the following symbols/ special characters
by pressing С) and appropriate key (>) or directly from the
sky-blue keys ((2)) located next to the LCD display:
D8, Ж, (,9$,/, л, ©, #,)
D+, X, =, +, =
3. Making Corrections
Move the cursor to the number or letter to be corrected. Enter
the correct number or letter to replace the previous one.
(1) Inserting characters
Move the cursor and press to change the cursor from
"WM" to^ 4". You can now insert new characters at the cursor
position.
Press again to change the cursor from " 4" to "I".
(2) Deleting characters
Press to delete the character at the cursor position.
Press to delete the character to the left of the cursor.
6
. and (BS) will not operate in some cases such as when
inputting time during the schedule entry or when using the
calculator. In these cases, press the key and
reenter.
* Press to clear all characters on the current display.
Notes for the Built-in Calendar and the Time
• Calendar, Schedule, and Clock modes allow you to enter the
desired date and tíme between Jan. 1, 1901 and Dec. 31,
2099.
e Ifan attempt is made to store an invalid time or date, you
cannot move the cursor to date entering, or cannot store
time and date by pressing (ENTER). Enter the correct value
and press again.