Sharp ER-A610 - Page 124

[JOB#2220]
LINKED PLU PROGRAMMING
XXXXXX: PLU code = 1 ∼ 999999
YYYYYY: PLU code = 1 ∼ 999999
When the "ST" key is depressed without entering any number in
(YYYYYY), there is no link.
PLU code should already be defined when they are used in program-
ming here.
MRS = 0
[JOB#2221]
SET PLU PROGRAMMING
XXXXXX: PLU code = 1 ∼ 999999
YYYYYY: PLU code = 1 ∼ 999999
When the "ST" key is depressed without entering any number in
(YYYYYY), no set is assigned.
The set PLU code (XXXXXX) can not contain the same PLU code in
(YYYYYY).
PLU code must already be defined when it is used in programming
here.
MRS = 0
[JOB#2230]
PLU CODE PROGRAMMING (range)
XXXXXX: Start PLU code = 1 ∼ 9999
YYYYYY: End PLU code = 1 ∼ 9999
AB: Dept. code = 1~99
C: Amount entry type C
Inhibited 0
Open 1
Preset 2
Open and preset 3
Delete 4
[JOB#2231]
PLU function programming (RANGE)
XXXXXX: Start PLU code = 1~999999
YYYYYY: End PLU code = 1~999999
A: Tare table No. A
No 0
Table No. 1~9 1~9
B: Scale entry B
Inhibit 0
Enable 1
Compulsory 2
[JOB#2232]
PLU TAX STATUS PROGRAMMING (RANGE)
XXXXXX: Start PLU code = 1 ∼ 999999
YYYYYY: End PLU code = 1 ∼ 999999
A: Sign A
+ 0
–1
B: Taxable 6 B
Non taxable 0
Taxable 1
C: Taxable 5 C
Non taxable 0
Taxable 1
D: Taxable 4 D
Non taxable 0
Taxable 1
E: Taxable 3 E
Non taxable 0
Taxable 1
F: Taxable 2 F
Non taxable 0
Taxable 1
G: Taxable 1 G
Non taxable 0
Taxable 1
ST 2220 YYYYYY TL XXXXXX
Max. 5 times
0
PLU CODE
X X
ST 2221 YYYYYY TLXXXXXX
Max. 10 times
0
PLU CODE
X X
2230 YYYYYYXXXXXX
1 RECORD
PLU CODE
ST
ABC
TL
X X X
C DEPT n
2231 YYYYYY XXXXXX
1 RECODE
PLU CODE
ST
AB
TL
0
X X X
2232 YYYYYY XXXXXX
1 RECORD
PLU CODE
ST
ABCDEFG
TL
0
X X X
 35 