[JOB#2612]
MACHINE NUMBER SETTING
XXXXXX: Machine number (0 ∼ 999999)
MRS = 0
[JOB#2613]
CONSECUTIVE NUMBER SETTING
XXXX: Consecutive number (0000 ∼ 9999)
MRS = 0000
[JOB#2614]
LOGO TEXT PROGRAMMING
X: 1 ∼ 6 1 (21 char.)
2 (21 char.)
3 (21 char.)
4 (21 char.)
5 (21 char.)
6 (21 char.)
Character can be entered by using character keys or numeric keys.
The key entry sequence for entering one character by numeric keys
is as follows:
XXX → 00 Key XXX: Character code (3 digits)
Please refer to section 3.
[JOB#2615]
Programming of the limits to initial slip feed line, No. of times of slip
printing, TRY ST feed line and No. of times of validation printing.
XX: Minimum length for bill on receipt = 0 ∼ 30
a, b: Initial slip feed line = 0 ∼ 64
c, d: Slip print max line No. = 0 ∼ 99
Y: No. of times of validation printing = 0 ∼ 9
Z (For Germany): Left margin shift = 0 ∼ 9
Z (For other country): Not used (Fixed at "0")
It can be programmed in the SRV mode whether or not to validate the
limits to slip initial feed, the No. of times of slip printing, and number
of times of validation printing.
MRS = 009910
[JOB#2616]
OPTIONAL FEATURE
X: 1 MRS = 00000000
A: OP X/Z report A
Enable 0
Disable 1
B: PO operation in REG mode B
Enable 0
Disable 1
C: Not used (Fixed at "0")
D: "RF" key entry in REG mode D
Enable 0
Disable 1
E: Direct void function in REG mode E
Enable 0
Disable 1
F: In direct void in REG mode F
Enable 0
Disable 1
G: Subtotal void in REG mode G
Enable 0
Disable 1
H: Refund VP H
Non compulsory 0
Compulsory 1
X: 2 MRS = 00000000
A: The first last item void A
Enable 0
Disable 1
B: PLU level shift system B
Auto 0
Manual 1
C: PLU level shift system C
MGR & REG mode 0
MGR mode 1
D: Printing of the number of purchases D
No 0
Yes 1
E: Time print E
Yes 0
No 1
F: Printing of journal F
Full print 0
Journal select 1
0
2612
TLXXXXXX
X
0
2613
TLXXXX
X
2614
Character key ST TL
Space
X
Position code
X X
SHARP
IS
THE BEST
YOUR
REC I PT
THAN YKOU
E
MRS =
2615
TL
xxabcdyz
0
X
44
To Next Page
Loading...
