Sharp ER-A610

[JOB#908] MRS=0000
#908-A: GT print on Z report
GT1 (NET) GT2 (+) GT3 (–) 908-A
Print
Print
Print 0 ★
Skip 1
Skip
Print 2
Skip 3
Skip
Print
Print 4
Skip 5
Skip
Print 6
Skip 7
#908-B: GT print on X report
GT1 (NET) GT2 (+) GT3 (–) 908-B
Skip
Skip
Skip 0 ★
Print 1
Print
Skip 2
Print 3
Print
Skip
Skip 4
Print 5
Print
Skip 6
Print 7
#908-C: 1. Add void-mode transaction data to hourly total report
2. X1/Z1 report in X2/Z2 mode
3. Resetting of consecutive number in Z1 resetting
1. Add
void-mode
transaction
to hourly
total report
2. X1/Z1 report
in X2/Z2
mode
3. Resetting of
consecutive
No.in Z1
resetting
908-C
No
Enable
No 0 ★
Yes 1
Disable
No 2
Yes 3
Yes
Enable
No 4
Yes 5
Disable
No 6
Yes 7
#908-D:
1. Printing X/Z report Journal only/Receipt & Journal (Except the
individual cashier/clerk report)
2. Z1 resetting, resets GT Enable/Disable
1. Printing X/Z report 2. GT resetting at Z1 908-D
Receipt & Journal
Disable 0 ★
Enable 1
Journal
Disable 4
Enable 5
[JOB#909] MRS=0001
#909-A: 1. Printing of balance GT on the Z report
2. Printing of training GT on the X report
3. Printing of training GT on the Z report
1. Printing of
balance GT
on the Z
report
2. Printing of
training GT
on the X
report
3. Printing of
training GT
on the Z
report
909-A
Print
Skip
Print 0 ★
Skip 1
Print
Print 2
Skip 3
Skip
Skip
Print 4
Skip 5
Print
Print 6
Skip 7
#909-B: 1. Printing of data on PLU resetting report
2. All Z1 resetting in X1/Z1 mode
3. Printing of data on EAN resetting report
1. Printing of
data on PLU
resetting
report
2. All Z1
resetting in
X1/Z1 mode
3. Printing of
data on
EAN
resetting
report
909-B
Print
Enable Print 0 ★
Disable
Print 2
Skip 3
Skip
Enable
Print 4
Skip 5
Disable
Print 6
Skip 7
#909-C: 1. Printing of data in void-mode totalizer and manager void
totalizer on Z2 report
2. Printing of data in void-mode totalizer and manager void
totalizer on Z1 report
1. Void-mode totalizer
on Z2 printing
2. Void-mode totalizer
on Z1 printing
909-C
Print
Print 0 ★
Skip 2
Skip
Print 4
Skip 6
#909-D: 1. Pressed clerk key change during entry operation
2. Entry of clerk# compulsory (Clerk system: Push key or
code entry system)
1. Pressed clerk key
change during entry
operation
2. Entry of clerk#
compulsory 909-D
Disable Redesignation
1 ★
3
Enable Every transaction
5
7
 6 