Sharp ER-A610

#916-D: 1. Coupon PLU printing on X/Z report
2. Net sales subtotal (NET1) printing on X/Z report
3. CHECK change total printing on X/Z report
1. Print coupon
PLU’s on
general report
2. Print net
sales SBTL
(NET1) on
general report
3. Print CHK
CHANGE on
general report
916-D
Print
Print
Print 0 ★
Skip 1
Skip
Print 2
Skip 3
Skip
Print
Print 4
Skip 5
Skip
Print 6
Skip 7
[JOB#917] NOT USED: MRS = 0000
[JOB#918] MRS = 0000
#918-A: 1. Printing of text of a tied PLU in set PLU
2. Dirrect non-tendering finalization after previous tender
entry
3. Output of set PLU to KP
1. Printing of
text of a tied
PLU in promo
PLU
2. Dirrect
non-tendering
finalization
after previous
tender entry
3. Output of set
PLU to KP
917-D
Yes
Disable
By PLU 0 ★
Set PLU’s KP 1
Enable
By PLU 2
Set PLU’s KP 3
No
Disable
By PLU 4
Set PLU’s KP 5
Enable
By PLU 6
Set PLU’s KP 7
#918-B: 1. Red color printing on KP when PLU’s unit price is zero
1. Red color printing on KP when PLU’s unit price is
zero
918-B
No 0 ★
Yes 2
#918-C: 1. Printing Z1/Z2 counter in Z reports
2. Printing the DEPT/PLU text on KP in double-size char-
acter
1. Printing Z1/Z2
counter in Z reports
2. Printing the
DEPT/PLU text on
KP in double size
character
918-C
Print
Skip 0 ★
Print 1
Skip
Skip 4
Print 5
#918-D: 1. Tip paid includes cash tip
2. Clering of tip totalizer at clerk Z1 report
3. Printing of tip totalizer on the clerk report
1. Tip paid
includes
cash tip
2. Clering of tip
totalizer at
clerk Z1
report
3. Printing of tip
totalizer on
the clerk
report
918 -D
Yes
No
No 0 ★
Yes 1
Yes
No 2
Yes 3
No
No
No 4
Yes 5
Yes
No 6
Yes 7
[JOB#919] MRS = 4000
#919-A, B: Not used (Fixed at "40")
#919-C: 1. Amount printing when PLU unit price is 0
1. Amount printing when PLU unit price is
0
919 -C
No 0 ★
Yes 1
919-D: 1. Conversion SBTL printing of native SBTL
1. Conversion SBTL print 919-D
Yes 0 ★
No 4
[JOB#920] MSR = 0000: INLINE PROGRAMMING
AREA
#920-A: 1. Back-up master function
1. Back-up master function 920-A
Not 0 ★
Exit 1
#920-B: 1. System report and down-load job is executed in the
back-up master
2. The clerk system
1. System report and
down-load job is executed
in the back-up master
2. The clerk
master 920-B
Disable
Centraized 0 ★
Individual 1
Enable
Centraized 4
Individual 5
#920-C: 1. Broad cast communication
2. PGM mode can enable/disable the satellite unit in the
in-line mode.
1. Broad cast
communication
2. Programming by the
Satellite unit
920-C
Exist
Disable 0 ★
Enable 1
Nothing
Disable 4
Disable 5
 9 