Siphon cover
Remove the detergent drawer from its place (see page
99).
Remove the siphon plug as shown in
the
picture and clean the
softener residues thoroughly. Replace the cleaned siphon plug.
Check whether the it completely fits.
Drum Cleaning
Do not leave metal parts like needle. paper clip. coins inside your
machine. This machines cause rust to form inside the drum.
Use a non-chloride cleaning agent
to
clean these rust stains and
comply with the warnings of the cleaning agent manufacturer. For
the cleaning of the rust stains, denitely do not use wire wool or
similar hard objects.
Body Cleaning
Clean the outer body of your machine with a non-corrosive. inam-
mabie cleaning agent. After rinsing the body of the machine you
cleaned with some clean water, dry with a soft and dry cloth.
OVERVIEW OF YOUR DEVICE
General Appearance
.. ••• • • • • • • • • ••• •• • • . • . •• t-Upper tray
•.•••••••••••••••••••• 2-Detergent drawer
.•.•••••.•• 3-Programme button
. . •••• 4-High-resolution
LCD display
·
·
·
.
.
·
·
.
.
({)0'.....
·5-Touch buttons
7-Pump filter
cover
To Next Page
Loading...