SETTING UP THE MACHINE (~if
J
Have your machine installed only
by
an authorized service company.
Removing transportation safety screws
~
Before operating your machine, you
must remove the transport safety
screws on the backside of the machi-
ne.
The transport safety screws should
be loosened
by
rotating them counter
clockwise with an appropriate wrench.
MAINTENANCE AND CLEANING OF
YOUR MACHINE
.Lh
Notice!
~
u.
nplug your machine before starting the
J\
maintenance and cleaning of your rna-
- chine.
/{~~;k:rTurn off the water inlet before starting
ili
'c
~.;Jthe maintenance and cleaning of your
.Ji
machine .
.Lh
Notice!
Your machine's parts might be damaged
jf
cleaners
with solvent agents are used. Do not use cleaning
materials with solvent agents.
To Next Page
Loading...