Note: According to the amount of water inside the machine, you
may have you empty the water collection container a few times .
• Put back the plug of the black rubber hose after discharging the
water.
• Mount the black rubber hose back to its clamp.
<m
GI@
b============================================== ~==============================================~
• Loosen the
niter
cover by turning
it
counter-clockwise, and remove by pulling.
, Glean the foreign materials inside the Iter
with the help of a brush.
-Atter cleaning the filter replace the filter
cover and tighten by turning clockwise.
-Please note that filter cover will leak water
unless properly placed back.
• You can close the pump cover reverse of
how you opened
it
• While closing the pump cover, ensure that
the parts inside the cover meet the holes on
the front panel side.
PACKAGING
AND
THE ENVIRONMENT
DISPOSING OF
PACKAGING AND
YOUR OLD
MACHINE RESPONSIBLY
Removal
of
packaging materials
Packaging materials protect your machine from the damage that
might occur during transportation. Please recycle you packaging
materials.
Recycled material provides both raw material savings and decre-
ases waste production
Removal of old machine
Old electrical devices might still contain salvageable parts.
So, never throw your old devices that you do not use into the
waste.
Ensure the parts of your aid electronic or electrical devices are
reused by giving them to your local recycling centre.
Please ensure your old appliances are kept in an appropriate
place for the safety of children until they are taken outside
the house.
To Next Page
Loading...